Volume & Issue: Volume 7, Issue 1 - Serial Number 12, January 2018 

Determining the suitable maintenance capacity for some conventional tractors in Iran using queuing theory

Ehsan Houshyar, Mahmood Mahmoodi-Eshkaftaki

Abstract Farm tractors are an unavoidable part of agricultural activity and it is desired that when failures accoured, the tractors get prepared at a minimum time and back to the farms. With an effective maintenance program, the costs of maintenance and machine downtime reduce at an acceptable value. In the current study, the life and maintenance distribution functions of a mechanized system including two MF???, two MF??? and two NewHolland ??? tractors were assessed. The maintainability of tractors and system reliability were analyzed in the next steps. Finally, a suitable maintenance system was proposed based on the queuing theory. Indeed, in the current study by combination of life and maintenance distribution functions and queuing theory, the capacity of a suitable maintenance system was estimated such that tractors with minimum downtime work continuously. The results showed Poisson function suitable for life and Exponential function suitable for maintenance. The two NewHolland ??? tractors consume around ??? hour more time for emergency maintenances compared to two MF??? tractors in around ???? hour life duration. The reliability of the system was ??% during ?? working hours with three available tractors. The suitable maintenance capacity was proposed around ?.? maintenance per working shift.

Effect of moisture content, particle size and solvent type parameters on oil extraction from Mazafati date pit and its biodiesel production using ultrasound

Seyed Reza Hassan-Beygi, Hamed Zaresani, Ali Sharif Paghale, Barat Ghobadian, Mojtaba Saberi-Moghadam

Abstract The Iran's share of global production of date palm was ?,???,??? tons. It could be estimated that ????? tons of date pit oil can be extracted annually. The aim of this study was to investigate the effect of particle size, moisture content and the type of solvent parameters on oil extraction from Mazafati date pit and biodiesel production from that. The effect of particle size in two levels, the solvent type and moisture content parameters on three levels were investigated on oil extraction from Mazafati date pit. The extracted date pit oil converted to biodiesel by transesterification reaction. Ultrasound waves used in order to produce biodiesel. The ultrasound parameters were vibration pulse on three levels, ultrasound duration on two levels and fixed vibration amplitude at ??%. Some of the properties of produced biodiesel from date pit oil were determined. The results showed that the effects of moisture content, particle size, type of solvent and interaction effect of moisture content by solvent type were significant (P

Segmentation of Broiler Chickens to Predict Their Weight Using Active Shape Model

saman abdanan mehdizadeh, Somaye Amraei

Abstract Due to the problems of body weight measurement methods directly (e.g. being stressful for both farmers and animals), a method based on digital images for determination of growth rate and body size of various animals have been proposed. However, determination of animal's physical characteristics along with head conveyed significant errors in body dimensions due to frequent changes of its position. Therefore, the aim of this study was to reduce prediction error of chicken weight with removing its head using active shape model. After removing chickens’ head between area and perimeter of chickens’ body with actual weight, regression models were developed and its results was compared with Otsu segmentation method. The correlation coefficients obtained from active shape model between actual weight with area and perimeter were ??% and ??% respectively; and these coefficients are higher then Otsu method (??% and ??%, respectively, for actual weight with the area and perimeter), therefore, removing head using active shape model increased prediction precision of live body weight.

Selection the Suitable Model for Forecasting MF399 tractor failure rate for different maintenance policy

Fatemeh Afsharnia

Abstract Today, mechanized farming systems, on time performance of operations requires correct machine programming. For proper planning, it is necessary to know the exact downtime of machines. In this regard, the study was conducted to accurate predicting of MF??? tractor failure rate for the both of corrective and preventive maintenance policies in Khuzestan province. For this purpose, Models applied to forecast are Exponential and ARIMA. Results of Durbin-Watson tests, failure rate of corrective and preventive maintenance policies series were found non stochastic and predictable. Based on the lowest forecasting error criterion, ARIMA is the best model for forecast failure rate of CM and PM policies series. Hence, using the forecast method can affect on different policy about failure rate via forecasting the fluctuation variables. According to results of failure rate forecasting, it was found that there is not significant difference between statistical descriptive measures of forecasting and actual tractor failure rate that it represents high accuracy of forecasting via ARIMA model.

Experimental Investigation on the Effects of Nanoparticle Addition In Biofuel Blends on the Emission Characteristics of a CI Engine

abbas taghipour, fatemeh khodaei chegeni

Abstract In many countries, diesel fuel is the most important for use in diesel engines. The use of diesel fuel in this engine would be harmful emissions and cause irreparable damage to the environment.Although various measures is taken to curb pollution such as vehicle inspection programs or control systems installed in vehicle exhaust emissions in developed countries .But these programs is not reduced enough in large cities to the problem of air pollution.In this regard, biofuels have inherent physical and chemical properties that make them in practice, seems cleaner than other fuels. One of the main topics of nanotechnology is materials with new properties and its positive effects, raising the efficiency of current internal combustion engines. In this study,an experimental investigation is carried out to establish the emission characteristics of a compression ignition engine while using cerium oxide nanoparticles as additive in neat diesel and diesel-biodiesel blends. The diesel engine emissions were measured at four engine speed levels (????, ????, ???? and ???? rpm) for the different fuel blends. The results showed that in most blends, the hydrocarbons and carbon monoxide has fallen than diesel fuel.But the amount of nitrogen oxides and carbon dioxide produced by the blend of fuel increased than diesel fuel.

Comparison of different artificial intelligence-based models for prediction of dissolved oxygen rates at fish growing pools- Case Study: Ahvaz city

Seied Mohammad Javad Afzali, Mohammad Javad Sheikhdavodi, Seied Reza Seiedmortezaie

Abstract High energy consumption and worker costs caused to fish growers don’t have highly motivated to buy aerators. Dissolved Oxygen (DO) is one of the importance parameters which can be applied for time of starting and finishing activity of aerators however its sensor is expensive and should be estimated by other parameters. The aim of this research was to create a suitable model to estimate DO rate at growing pools. Input parameters were pH and temperatures of water, moisture and temperature of air and wind speed. Along growing period total of parameters were measured and with three models were estimated. The first one was Artificial Neural Network (ANN). The results showed that the maximum R? was achieved by logsig-purelin transfer function with ?? neuron at hidden layer with ?.??. Second one was an aggregated ANN-AG model and its result showed that the maximum of R? was ?.?? and finally, Third one was Adaptive Nero Fuzzy Inference System (ANFIS) model and the results showed that at condition of ? Membership function per layer with gaussian type and constant output could estimate DO with R=?.?? accuracy. Therefore ANN was the best method for evaluation of DO at growing pools for the region under study.